Stamping Basic Electrical Components for low voltage electrical appliances

Metal Electrical Components Welded with Silver Contact for Automotives Switches

Introduction:

There are mainly three kinds of Metal Stamping Part:

(1) Riveting Parts: contact is riveted on copper component
(2) Welding Parts: sheet contact is welded on copper component
(3) Stamping Parts: precious clad metal is stamped into contact bridge component


Main Application: low voltage electrical appliances and households, Switch Relay Thermal Controller Circuit Breaker Contactor Controller Timer,
Treatments: removes burr, cleaning.
Accuracy of facility: +/-0.01
Production facility: welding machine, riveting machine Switches plugs and electronic access control Electronics and electrical appliances, cars, aviation industry

OUR PRODUCING PROCESS:

1. Tooling (Mold) design and Manufacture.
2. Manufacture the parts according to the Stamping Machine.
3. Riveting, Welding or Screw tap according to Client's requirement.
4. After finish manufacture process we will test the parts by the Image measurement instrument, Caliper, Angel Gage etc.
5. After make sure all the dimension can reach customer's require, we will make the surface treatment process.
6. After finish surface treatment we will testing all the parts by worker so that we can make sure the parts which we sell is 100% qualified.
7. After finish testing we will pack the parts with dryer vacuum packing.

basic electronic components

basic circuit components

Stamping Basic Electrical Components for low voltage electrical appliances Images